| |
About AGS
Technology™
-
Airspace engineers have set the standard by providing
the marketplace a family of safe, economically sound, gas monitors
that utilize patent-pending Advanced Gas Sensor (AGS)
TechnologyTM.
-
The AGS TechnologyTM provides a highly sensitive sensor
that responds quickly in detecting lethal gases. Even low
concentrations of CO can be detected within seconds. The
environment is sampled every 4 seconds while alarming.
-
The AGS TechnologyTM allows Airspace
Monitors to
warrant five years of cost-effective use. Our solid-state sensor
design means there is nothing to wear-out or replace. The sensor's
performance remains consistent over time.
-
Airspace engineering has overcome the
power-limitations of earlier solid-state based sensors. The
Airspace Monitor uses just two AA alkaline batteries. Up to
three-month's of typical 8-hour shift operation is possible.
-
Airspace Monitors have been rigorously
tested and all models have the approval by the Underwriters
Laboratory, Inc., for use in Class 1, Division 1, Group A, B, C, and
D, T3C environments.
-
The Airspace Monitors are ideal
for markets such as fire, police, EMT, HVAC, industrial hygiene,
camping, pilots, boating, security, and all
applications
where the detection of carbon monoxide and other lethal gases is
desired.
-
The cost of ownership is significantly lower
with Airspace AGS TechnologyTM. By eliminating sensor replacement
expense and the need to use expensive certified calibration gas for
regularly scheduled calibration the Airspace Gas Monitors provides
the lowest cost of ownership available.
-
Finally, everyone who should be protected can be!
|
5-Year
Cost of Ownership Comparison |
|
|
Airspace CO
Monitor with LCD |
Electrochemical-based Gas Monitor |
|
Solid State
Technologies |
$0 |
Not Available |
|
Cost for
Calibration Equipment |
$240 for bump test kit to
verify performance |
$400 - $750 |
|
Cost for
Calibration Gas* |
$120 |
$450 |
|
Cost in Sensor
Replacement |
$0 |
$350 - $500 |
|
Calibration and
Maintenance Labor |
Minor |
Expensive |
|
Battery Cost** |
$10 |
$20 - $160 |
|
Cost After
Initial Purchase |
$370 |
$1220 - $1860 |
*Assumes 1 LPM flowing for 3.5
minutes, calibrating once a month. ** Some competitive equipment requires expensive NiCad or NiMh
battery replacement and disposal.
Contact Airspace today to learn more about
how AGS TechnologyTM can help you!
Back to AIRSPACE Home
Copyright ©2001-2009 AIRSPACE Inc.,
All Rights Reserved
Last Update:
05/28/09
|
|